The Methods to Delete Resin Bubbles

| Epoxy Table| Almas Turkey

The Methods to Delete Resin Bubbles

Nowadays, the Methods to Delete Resin Bubbles are of vital importance. When the elements called “resin” and “hardener” are compounded, it is likely that Bubbles are shaped. Another stage in which bubbles are formed on the surface of the template is while pouring the resin. This essay will outline some reasons for this, as well as suggest some solutions.

The Compound of Hardener and Resin

The compound of hardener and resin has the feature of bubble formation. Firstly, bubbles create when we combine the hardener and the resin. In order to decrease the bubbles, it is much more significant that you combine them softly, and we have to utilize several methods to delete bubbles.

Resin Vacuum Machine| Epoxy Table| Almas Turkey
Resin Vacuum Machine| Epoxy Table| Almas Turkey

Resin Vacuum Machine

Using a resin vacuum machine could definitely be an efficient method to delete bubbles, this means that we have to locate the combination of resin and hard inside the machine until it reaches the temperature of 0.5 centigrade. Also, Opening and closing the vacuum machine is paramount and should be done 3 times. Furthermore. We turn it on for 5 to 10 minutes in each step to decline the bubbles over time.

Technical hairdryer| Epoxy Table| Almas Turkey

Technical hairdryer

The technical hairdryer plays an essential part in deleting bubbles because when we pour epoxy resin on the table, the air inside the wood develops the bubbles. Those bubbles then come to the surface after pouring the resin. Consequently, we have to delete them using the technical hairdryer. During this process, the distance of the technical hairdryer to the table is important which should be around a half meter.

Hot water container| Epoxy Table| Almas Turkey

Hot water container

Another way to delete bubbles is to utilize a bowl of hot water. As a result, when we put the resin template in a bowl of warm water, the warm water assist to delete the bubbles. This is an efficient and useful method which is so common.


The main problem is for those bubbles that appeared inside of the wood and are not removed using the technical dryer.

So, what should we perfume for such bubbles?

Thanks to the needle, we are able to bring the bubble to the surface, then omit them with a hairdryer.

what to do if the dried resin has bubbles?

If we have a dried resin , it must probably be repaired. This means that we have to sand resin again until we reach the wood so that we could remove the bubble then pour the resin again and fill all the holes. Thus, it is better that we perfume our job carefully so that we do not have any bubbles.

One thought on “The Methods to Delete Resin Bubbles

Leave a Reply